Neither this manual, nor any of the material. These default values are quite demanding and your system might not function properly if you are using slower memory chips or other low-performance components. You must install at least one memory module in order to use the mainboard. Any jumper on your mainboard that do not appear in the illustration above is for testing only. Suspend Time Out This sets the timeout for Suspend mode in minutes. Got it, continue to print.

Uploader: Tojazahn
Date Added: 27 March 2010
File Size: 65.19 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 7354
Price: Free* [*Free Regsitration Required]

This mainboard provides an optional AGP4x slot. On the mainboard, locate the header COM2 for this bracket. Mainboard Installation Chapter 2 Mainboard Installation To install this mainboard ms83088ep a system, follow the procedures in this chapter: This publication, including all photographs, illustrations and.

The Mother Board

Don’t have an account? This program is available for: If the time selected passes without any system activity, the computer will enter power- saving Standby mode. Page of 37 Go. If you press Y, and then Enter, the Setup Utility loads a set of best- performance default values.


The information in this document is subject to change without notice. Plug the serial cable into COM2. The mainboard supports Socket processor front-side bus speeds of MHz. Identify the mainboard components Install a CPU Install one or more system memory modules Verify that any jumpers or switches are set correctly Install the mainboard in a system chassis case Connect any extension brackets or cables to the mainboard connector headers Onboard Parallel Use this item to enable or disable the onboard Port LPT1 parallel port, and to assign a port address.


Install them by following the steps below.

MATSONIC MS8308E User Manual

Neither this manual, nor any of the material contained herein, may be reproduced without the express written consent of the manufacturer.

Keep the mainboard and other components in their original static-proof packaging until you are ready to install them.

Drives can be 3. Hardware Monitor Page 3: Disable this item unless you mqtsonic using an old KB drive. Enter text from picture: Other names used in this publication may be trademarks and are.

Take some care with this page. Making changes can affect the operation of your computer. Password Check If you have entered a mztsonic for the system, use this item to determine, if the password is required to enter the Setup Utility Setup or required both at start-up and to enter the Setup Utility Always. All the ribbon cables used on the extension brackets have a red stripe on the Pin-1 side of the cable. Install The Mainboard 2: The system will automatically detect the kind of CPU that you have installed and make the appropriate adjustments to the items on this page.


This manual also for: You must install at least one memory module in order to use the mainboard. If you press the F3 key, the system will automatically detect and configure the hard disks on the IDE channels.

The Mother Board • View topic – Best CPU for Matsonic MSEP()

Take the following precautions when unpacking the mainboard and installing it in a system. The Auto setting will detect and available address. The information in this document is subject to change without.

Comments to this Manuals Your Name. Users may get this information from our World Wide Web. Standard Cmos Setup Page 3: