Helpful 0 Not Helpful Comment Flag. E-Mail Extended ConfigThis sets functions related to reception and disposition notifications for E-mail when the Internet fax is in use. To enable NetWare, follow these steps: George Mclaughlin Level 2 Expert Answers. Passwordinput is necessary to configure settings. The address is selected with [][Switch the page with [].

Uploader: Zulkijind
Date Added: 17 February 2011
File Size: 69.14 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 25997
Price: Free* [*Free Regsitration Required]

Control Panel DescriptionsThe buttons on the control panel and the keys displayed on the LCD screen are used to make scanned settings. V AppendixThis section covers product specifications forthe network scanner and the index. Please make sure that the network is connected if the following messages are displayed. The machine will store the complete file and send out the data in packets. The NetWare Configuration screenis displayed. Make the settings required to match theenvironment into which this system is being introduced.

The following settings are made on 72222 screen. Should you wish to disable NetWare, deselect the option box.

Device ConfigurationThe [Device Configuration] screen is used to configure device settings. Konica Minolta Cassette Guide. Selecting the Destination] Page Ask a Question Usually answered in minutes! Touch the [] or [] key on the LCD screen to switch the screen.


E-Mail Extended Configcannot be used when the optional kpncia disk is not installed. Location1Touch the [Location] key. If the settings for this item have already been made, selecting [ON] deletes the user name andpassword. Set the document on the copier RADF or the platen glass. To change the DHCP settings, follow these steps: Network Error ListTake the following steps in response to the corresponding errors.

Konica Laser Copier Developer -Pages. Each time you touch the [EDIT] key, the setting is switched.

Please enter a valid email address. The following settings are made on the [Network setting] screen. The default values for the following items can be set with key operator mode.

If an error message is displayed on the touch panel, refer to [ Scanner Initial SettingsOriginal direction defaultThis sets whether or not to automatically rotate images imported in with the scanner.

Toner cartridge for Konica Minolta

Touch the [] or [] key to switch to the input character type screen. If this message is displayed, be sure to switch the main powerfor the copier OFF klncia wait at least 10 seconds, then turn it back ON.


E-Mail Notification ConfigurationThis sets a knocia for notifying the machine status, errors, etc. Specify four sets of three digit numbers, separated by the periods as the default gateway address. Be sure to wait at least 10 seconds after turning offthe main power switch before you turn the copier back on. The factory default is [OFF] Do not switch screens automatically.

KC Copiers

To disable binary division. Tell us some more! Selecting the Destination9Touch [Condition] key. Setting the Printer Number to will allow the system to automatically set the number.

Up to four attributes can be selected from eight types of attributes on the [LDAP search detail ] screen to perform asearch.